Create more value and wealth through our quality products and professional solutions.
|Place of Origin:||China|
|Minimum Order Quantity:||1|
|Delivery Time:||25-30 work days|
|Payment Terms:||L/C, T/T|
|Supply Ability:||20000 units per month|
|Rated Power:||160kw/2200rpm||Blade Cutting Angle:||28-70°|
mini motor grader,
small motor graders
XCMG 215HP MOTOR GRADER GR215 WITH RIPPER AND FRONT BLADE XCMG Axle Motor Grader
1.Using Cummins 6CTA8.3-C215 turbocharged diesel engine, the output torque and power reserve factor is large, and the fuel consumption is low.
2.The gearbox and torque converter are electronically controlled power shifting and fixed shaft gearboxes. The torque converter has a large torque coefficient, a high efficiency, a wide effective area, and a good joint operation characteristic with the engine.
3.The drive axle is a dedicated XCMG axle.
4.Rear axle main drive is equipped with "NO-SPIN" without self-locking differential. When one wheel slips, the other wheel can still transmit its original torque.
5.The service brake is a dual-circuit hydraulic brake system that acts on the two rear wheels of the grader and is safe and reliable.
6.The sealed cab is used to configure the air conditioning system. The interior parts are sleek and compact plastic parts, which fully reflects the needs of ergonomics.
sepacification of sold stabilizer
|Basic parameters||Engine model||6CTA8.3-C215|
|Overall dimension (standard)||8970x2625x3420|
|Total weight (standard)||16500 kg|
|Ground clearance (front axle)||430mm|
|Space of front and rear axles||6219 mm|
|Space of middle and rear wheels||1538 mm|
|Performance parameters||Forward velocity||5,8,11,19,23,38km/h|
|Tractive effort f=0.75||87 kN|
|Tire inflation pressure||260kPa|
|Working system pressure||16MPa|
|Working parameters||Maximum steering angle of front wheel||±50°|
|Maximum slant angle of front wheel||±17°|
|Maximum oscillating angle of front axle||±15°|
|Maximum oscillating angle of equilibrium box||forwards15°,Reverse15°|
|Maximum steering angle of frame||±27°|
|Minimum turning radius||7.3m|
|Scrape knife||Maximum lift height||450mm|
|Maximum cutting depth||500mm|
|Maximum tilt angle||90°|
|Angle of revolution||360°|
|Length & chord height||4270x610mm|
|Oil filling amount||Coolant||50L|
1. Dump trucks; cargo trucks (1-120ton)
2. Tractor trucks; (1-120 tons)
3.Tanker trucks,( 55470323, 54640582, 54640443, 54622108, 54621778, 54621524, water tanker and oil tanker)
4. Mixer trucks and concrete pump truck
5. Mine dump trucks( 30 tons off-road mine tipper, 50tons/70tons mine dump truck, 6x6 articualted dump trucks)
6. Off-road drive trucks( 4x4. 6x6 and 8x8 Trucks)
7. Garbage trucks( garbage compactor truck, suction trucks)
8. Truck mounted cranes(normal road truck crane, truck mounted crane)
9. Special trucks( wrecker trucks, military trucks...)
10.Semi trailers( container semi-trailer, low-bed semi-trailer, tanker trailer, dumper trailer...)
11.Truck spare parts
1.Wheel loader,Backhoe loader
6.Crane(truck crane,crawler crane,truck mounted crane,self erecting crane)
7.Forklift and 45t contain reach stacker
8.Paver and so on
9. Spare parts
More details,kindly contact with me:
With over 51 years of experience , we have becoem one of the key manufacturers of trucks and road machiens in China .
Exporting to more than 50 countries for 14 years .
For more information ,contact us now.
Contact Person: DORIN YANG